The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.20
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.35
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports. GPM: 10.7, Max. PSI: 4,500, Directional Control: 4-way, 3-position, Volts: 120 AC, Indicator Light: Yes
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.48 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.61
Replacement part # 95-2839-P FLUID - HYDRAULIC (5 GN/PAIL) for Toro Lawn mower / Tractors / String Trimmers
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.27
This Northman industrial 4-way valve is commonly used to extend and retract a double-acting hydraulic cylinder. It is actuated manually with the hand-lever. As a spring-offset valve, it will remain in its home position until shifted and held, returning to home when the lever is released. Max. Flow (GPM): 25, Inlet Port (in.): 3/8 NPT, Outlet Port (in.): 3/8 NPT, Max. PSI: 3,000, Directional Control: 4 way
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.85 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.00
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91
This Northman in-line adjustable flow control needle valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. Port Size (in.): 3/8 NPT, Max. Flow (GPM): 8, Max. PSI: 3,000
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.73
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.85 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.00
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 7.19
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.20
The Wheeler Rex 3804 2 Gallon Hydraulic Pump Fluid.
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.61 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.72
This Northman flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is a free flow over a check valve. Valve mounts as a modular unit between a D05 size directional control valve and the subplate. Contains 2 separate pilot-operated check valves-one each on A cylinder port and B cylinder port. Allows metered flow adjustment in the cylinder ports as the flow exits, controlling the speed of the cylinder. As separate valves, speed may be controlled independently for the extend and retract operations. Requires longer than standard bolt kit to mount this flow control in valve stack. Max. Flow (GPM): 20, Max. PSI: 3,000
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. Max. PSI: 2,900, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.73
This Northman in-line adjustable flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is full free flow over a check valve. Port Size (in.): 3/4 NPT, Max. Flow (GPM): 20, Max. PSI: 3,000
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. Max. PSI: 2,900, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 7.19
FLUID - HYDRAULIC (5 GN/PAIL) for Lawnboy Lawn mower and Trimmers # 95-2839-P
The Dynamic Fluid Components hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure, making it an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements. Max. PSI: 900/3,000, Shaft Diameter (in.): 1/2, GPM: 11, Stage: 2, Rotations Per Minute: 3,600
The Dynamic Fluid Components hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure, making it an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements. Max. PSI: 900/3,000, Shaft Diameter (in.): 1/2, GPM: 13, Stage: 2, Rotations Per Minute: 3,600
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.61 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.72
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.73
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.85 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.00
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.48 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.61
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.20
This Northman flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is a free flow over a check valve. Valve mounts as a modular unit between a D03 size directional control valve and the subplate. Contains 2 separate pilot-operated check valves-one each on A cylinder port and B cylinder port. Allows metered flow adjustment in the cylinder ports as the flow exits, controlling the speed of the cylinder. As separate valves, speed may be controlled independently for the extend and retract operations. Requires longer than standard bolt kit to mount this flow control in valve stack. Max. Flow (GPM): 9.3, Max. PSI: 3,000
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.35
This Northman in-line check valve is designed to allow free flow of oil in a hydraulic system in one direction and block flow in the reverse direction. Port Size (in.): 1/2 NPT, Max. Flow (GPM): 17.1, Max. PSI: 3,000
This Northman industrial 4-way valve is commonly used to extend and retract a double-acting hydraulic cylinder. It is actuated manually with the hand-lever. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted to one of 2 positions to either extend or retract a cylinder, returning to home when the lever is released. Max. Flow (GPM): 25, Inlet Port (in.): 3/8 NPT, Outlet Port (in.): 3/8 NPT, Max. PSI: 3,000, Directional Control: 4 way
The Dynamic Fluid Components high-pressure hydraulic gear pump features all-aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 6.27
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. GPM: 26.4, Max. PSI: 4,500, Directional Control: 4-way, 3-position, Volts: 120 AC, Indicator Light: Yes
This Northman in-line adjustable flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is full free flow over a check valve. Port Size (in.): 3/8 NPT, Max. Flow (GPM): 8, Max. PSI: 3,000
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. Max. PSI: 2,900, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 7.19
One quart low temperature hydraulic fluid. U.S.A.
The Dynamic Fluid Components hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure, making it an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements. Max. PSI: 900/3,000, Shaft Diameter (in.): 1/2, GPM: 8, Stage: 2, Rotations Per Minute: 3,600
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.35
This Northman adjustable relief valve is designed to limit the operating pressure in a hydraulic system to a maximum set pressure. The valve may be connected into the pressure line so that system pressure flows through, or it may be teed off the pressure line with one of the pressure ports plugged. When the system reaches the maximum desired setting, the internal piston moves to smoothly relieve pressure to tank, maintaining stable pressure control and repeatability. Ports are also provided for a gauge and for remote pressure control. Port Size (in.): 3/4, Gauge Port (in.): 1/4, Flow (GPM): 50, Max. PSI: 3,550, Adjustable Pressure PSI: 100 - 1,000
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203331 with 3/8in. NPT ports or 203341 with 1/2in. NPT ports. GPM: 26.4, Max. PSI: 4,500, Directional Control: 4-way, 3-position, Volts: 12, Indicator Light: Yes
Hydraulic Fluid, 1 Case(12 Qts), Replaces Meyer 15487Hydraulic Fluid. Replaces OEM Part Number #15487 For Meyer. 10.00 L. 13.25 W. 9.50 H.
Heavy-duty poly hydraulic reservoir from Buyers Products is lightweight, rustproof and virtually maintenance free. Ideal for applications where weight is a factor. Features dual 2in. NPT field-service able ports, 2in.-1 1/4in. screw-in diffuser and chain-mounted 40 micron filler breather cap. U.S.A. Capacity (gal.): 50, Suction Port (in.): 2, Return Port (in.): 1 1/4, Mount Type: Upright, Material Type: Polymer, Dimensions L x W x H (in.): 38 x 16 1/4 x 29
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports GPM: 16.8, Max. PSI: 4,500, Directional Control: 4-way, 3-position, Volts: 120 AC, Indicator Light: Yes
One quart low temperature hydraulic fluid. U.S.A.
| Function | Property |
|---|---|
| Medium for power transfer and control |
|
| Medium for heat transfer |
|
| Sealing Medium |
|
| Lubricant |
|
| Pump efficiency |
|
| Special function |
|
| Environmental impact |
|
| Functioning life |
|
